|
STRAPS & PADS
Wide rubber bands are used to secure the nylon tie straps to the board arms before the board pads are fitted. These can be slid on using the enclosed plastic tube to stretch them into position before release (see pictures).
To fit the board pads simply unfasten the Velcro seal, gently separate the foam tube and push them down over the arms.
At this stage avoid cutting the nylon securing straps to size until you have positioned all your boards and equipment. It is also recommended that you heat seal any cuts made to the straps to prevent the nylon from fraying.
GUARANTEE
Thank you for purchasing our VEHICLE RACKING SYSTEM we hope it will give you many years of reliable service. In the unlikely event that a problem does occur please contact us directly.
|
;)
;)
;)
;)